SPST,SPDT,DPST和DPDT是什么意思?
SP和DP是指单极和双极,ST和DT,指单掷和双掷。
极是指由开关控制的电路数:SP开关仅控制一个电路。DP开关控制两个独立的电路(并像两个机械链接的两个相同的开关一样)。不要将“极点”与“终端”混淆。例如,DPST开关具有四个终端,但它是DP,而不是4P开关。
扔指执行器的极端位置:ST开关仅在一个位置上关闭电路。手柄的另一个位置是关闭的。DT切换在向上位置以及向下位置(内)关闭电路。DT开关也可以具有中心位置(经常开放)。
Single pole/throw and double pole/throw switches are by far the most common switches, but triple and quadruple configurations are also available. They are commonly denoted 3PST, 3PDT, 4PDT, etc.
单击此处以获取我们的汽车开关
下载电线杆并扔数据表
以下开关图说明了切换和摇杆开关的最常见类型。(单击缩略图查看全尺寸图像)
SPST ON-OFF |
SPDT ON-ON 一次只能一次通电。 |
SPDT On-Ow-On-On 一次只能一次通电。 |
DPST ON-OFF Both load terminals can be energized at the same time. They are independent of each other and could be of different voltages. |
DPDT ON-ON Functions like two spearate SPDT switches operated by the same actuator. Only two loads can be On at a time. |
DPDT On-Own-Off Functions like two separate SPDT switches operated by the same actuator. Only two loads can be On at a time. |