ARP43- ARP系列

系列:ARP
问题?联系Littelfuse支持
外部概述图像
Roll Over to Zoom
免责声明通知

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

ARP系列用于两个电动机相等的运行时间的系统。选择器开关允许选择任一个负载的交替进行连续操作。LED表示输出继电器的状态。该多功能系列可以是安装的前面板(需要BZ1附件)或带有附件插座的35毫米DIN轨。


手术Alternating:当旋转开关处于“交替”位置时,负载A和负载B的交替操作发生在控制开关S1的打开时。要终止交替操作并仅导致选定的负载进行操作,请将开关旋转到位置“ A”以锁定负载A或位置“ B”以锁定负载B。LED表示内部继电器的状态,并且选择了哪个负载为操作。
注意:必须始终应用输入电压以进行正确的交替。S1的固态控制开关的使用可能无法正确启动交替。S1电压必须来自与设备的输入电压相同的电源(请参阅数据表上的连接图)。输入电压的损失重置该设备;负载A成为下一个操作的导线负载。
双工(交叉连线):双面模型与交替继电器相同,并且当关闭控件(S1)和滞后载荷(S2)开关时,同时加载A和负载b同时启动。
DPDT 8针,交叉接线选项,在需要时通过两个电动机同时操作允许额外的系统负载能力。继电器接触不隔离。

财产(Mouseover for details) 价值
输入电压(V) 120 VAC
输入公差(%) -20% - 10%
输入交流线频率(Hz) 50 /60
最大输出电压(V) 250
输出类型 机电继电器
Output Form 交叉有线DPDT
输出负载等级(VA) 10 A resistive @ 120/240 Vac and 28 Vdc; 1/3 hp @ 120/240 Vac
隔离电压(V) 输出的≥1500VRMS输入
终止类型 magnal 11针
安装方法 Plug-in socket
工作温度 -20° to 60°C (-4° to 140°F)
储存温度(f/c) -30° to 85°C (-22° to 185°F)
方面 3.2 H x 2.39 W x 1.78 D in. (81.3 x 60.7 x 45.2 mm)
重量(磅/g) 0公斤
检查库存 Yes
要请求产品环境信息,请完成产品环境信息请求表